Showing all 5 resultsSorted by latest
Sort:
MICROCEMENT ADHESION / BINDING PROMOTER AND INSULATING PRIMER
USE AS A PRESEALER FOR MATT or GLOSS 2K PROTECTOR
Intermedio K functions as an intermediary layer between the MicroMarmo Floor or MicroMarmo Ultra base and the Matt Protector 2K or Gloss Protector 2K lacquer, offering additional moisture protection. Applicable across all areas within the MicroMarmo system, it ensures waterproofing when paired with the two-component polyurethane lacquer, particularly effective in damp settings such as bathrooms, saunas, and SPAs.
Application: Brush and 10mm microfibre roller.
Dilution: Strain before use. No dilution required.
Coverage: 100 sqft / L (one coat). Apply 1 layer before Matt or Gloss 2K sealer and allow 24 hours of drying time before applying sealer.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS
TRANSPARENT TWO-COMPONENT ULTRAPROTECTIVE MATTE SEALER
MATT PROTECTOR 2K is the ultimate solution for preserving and enhancing decorative finishes on floors and walls with a matte finish. This two-component, multifunctional marvel offers unparalleled durability and resistance while delivering a sleek, matte appearance to surfaces.
As the final step in the MICROMARMO cycle, MATT PROTECTOR 2K ensures exceptional protection against wear and tear while providing a waterproof barrier. It also functions as a consolidating and dustproof finish for industrial concrete floors, both indoors and outdoors.
With its outstanding waterproofness, MATT PROTECTOR 2K serves as a non-shiny protective finish for decorative lime-based finishes inside shower areas and other moisture-prone environments, ensuring both protection and aesthetic enhancement.
Application: Brush and 10mm microfibre roller.
Mixing Instructions: Mix 5:1 ratio, A to B. Stir component A well before adding component B. Then mix A+B well for at least 3 minutes. Strain sealer before applying. Only mix the amount needed, as pot life is about 1 hour once mixed. ALWAYS mix by hand.
Coverage: 100 sqft / L, one coat. Apply 2 layers and allow 24 hours of drying time between each coat.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
TDS
SDS-A
SDS-B
[Sassy_Social_Share]
TDS
SDS-A
SDS-B
PROTECTIVE TRANSLUCENT DECORATIVE SEALER FOR INTERIOR WALLS
VELATURA Classica is a high-performance decorative sealer designed for interior walls finished with Venetian plaster, lime wash paint, or decorative microcement surfaces where waterproofing is not required. Suitable for walls only and not recommended for floors, it protects and enhances decorative finishes by improving washability while preserving the natural breathability and character of the surface.
VELATURA Classica can be customized through dilution and tinting, allowing for subtle or more pronounced decorative effects depending on the desired finish.
Application: Brush and 10mm microfibre roller.
Dilution: Ready to use or dilute up to 100%, depending on the level of protection required.
Coverage: Approximately 100 sq ft / L when undiluted.
Drying Time: Allow the surface to dry for 12–24 hours before light contact or additional treatment.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS
TWO-COMPONENT ULTRAPROTECTIVE GLOSSY TRANSPARENT COATING
GLOSS PROTECTOR 2K is the ultimate solution for preserving and enhancing decorative finishes on floors and walls. This two-component, multifunctional marvel offers unparalleled durability, resilience, and clarity, ensuring your surfaces remain pristine for years to come. Designed as the finishing touch in the MICROMARMO cycle, GLOSS PROTECTOR 2K provides a transparent shield against wear and tear while maintaining the original beauty of your decorative surfaces.
GLOSS PROTECTOR 2K also serves as a consolidating, dustproof finish with exceptional waterproofing capabilities, ideal for shower areas and mural surfaces.
Application: Brush and 10mm microfibre roller.
Mixing Instructions: Mix 5:1 ratio (A to B). Stir component A well before adding component B. Then mix A+B thoroughly for at least 3 minutes. Strain sealer before applying. Only mix the amount needed, as pot life is about 1 hour once mixed. ALWAYS mix by hand.
Coverage: 100 sqft / L (one coat). Apply 2 layers and allow 24 hours of drying time between each coat.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS-A
SDS-B
ECO FRIENDLY WATER BASE WAX FOR NATURAL VENETIAN PLASTER
Arthe Cera Top is water-based transparent wax paste specifically designed to protect both synthetic and lime-based Venetian plasters. It enhances the shine of polished plaster, improves washability and water repellency, and ensures greater uniformity of the final color.
It can be applied transparently, coloured, or embellished with the Arthe Perla, allowing you to add a special pearlized and metallic touch to the surface.
Application: Apply a very thin layer with a stainless steel spatula, let dry for 2 hours, then burnish with the same tool.
Dilution: Ready to use.
Coverage: Approximately 100 sq ft / L.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS