Showing all 7 resultsSorted by latest
Sort:
SINGLE-COMPONENT WATERPROOFING MEMBRANE
TopFlex One is a high-performance product designed to offer excellent adhesion and flexibility. Ideal as both an adhesive and a skim coat, it guarantees excellent workability on various substrates and is perfect for thermal insulation composite systems (ETICS). Thanks to its advanced formulation, it ensures high weather resistance and long-lasting durability, making it a reliable solution for finishing and restoration work.
TOPFLEX-ONE is used for:
METHOD OF APPLICATIONFor detailed application instructions and specifications please refer to the Technical and Safety data sheets.
TDS
SDS
A base under microcement- Waterproofing terraces and balconies
- Waterproofing concrete walls
- Anti-crack coating for the restoration of micro-cracked plasters
- Waterproofing metal sheet and wooden roofs
Coverage: Approximately 7 sq ft per kg at 1 mm thickness
- 5 kg bucket: ≈ 35 sq ft
- 20 kg bucket: ≈ 140 sq ft
METHOD OF APPLICATION
On Cementitious Surfaces
Check that the humidity level is less than 3%, measured with a carbide hygrometer at a depth of 4 cm. Dust the surface thoroughly and make sure that the substrate is dry and free from any traces of grease and oils. Apply one coat of DERASOL H2O diluted at a 1:1 ratio with water. Spread with a metal trowel in two layers, embedding a 90 g/m² fiberglass mesh. Apply the second layer after a minimum of 24 hours.On Tiles
Dust the surface thoroughly and make sure that the substrate is dry. Ensure that the tiles are well bonded and free from all traces of grease, oils, lichens, and mold. Apply one coat of MICROMARMO PRIMER. Spread with a metal trowel in two layers, embedding a 75 g/m² fiberglass mesh in the first layer. Apply the second layer after a minimum of 24 hours.On Bituminous Sheaths
Dust the surface thoroughly and make sure the substrate is dry. Apply one coat of MICROMARMO PRIMER, spreading it with a metal float in two layers and embedding a 75 g/m² fiberglass mesh in the first layer. Apply the second layer after a minimum of 24 hours.On Sheet Metal
Dust the surface thoroughly and make sure the substrate is completely dry. Apply one coat of CROMARZINC to rusty supports. After 24 hours, apply TopFlex One with a brush and/or metal float in two layers. Apply the second layer after a minimum of 24 hours.
TDS
SDS[Sassy_Social_Share]
MICROCEMENT ADHESION / BINDING PROMOTER AND INSULATING PRIMER
USE AS A PRESEALER FOR MATT or GLOSS 2K PROTECTOR
Intermedio K functions as an intermediary layer between the MicroMarmo Floor or MicroMarmo Ultra base and the Matt Protector 2K or Gloss Protector 2K lacquer, offering additional moisture protection. Applicable across all areas within the MicroMarmo system, it ensures waterproofing when paired with the two-component polyurethane lacquer, particularly effective in damp settings such as bathrooms, saunas, and SPAs.
Application: Brush and 10mm microfibre roller.
Dilution: Strain before use. No dilution required.
Coverage: 100 sqft / L (one coat). Apply 1 layer before Matt or Gloss 2K sealer and allow 24 hours of drying time before applying sealer.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS
TDS
[Sassy_Social_Share]
READY TO USE MICROCEMENT FOR WALLS, FLOORS, BATHROOMS & MORE
MicroMarmo Ultra is an advanced single-component microcement paste designed to create seamless, thin-layered decorative surfaces with exceptional durability. Ready to use and easy to colour, it allows for continuous floor-to-wall finishes with a refined contemporary look.
Its professional-grade formula is resistant to mold, algae, and bacteria, with low VOC levels, making it ideal for bathrooms, showers, saunas, kitchens, floors, walls, countertops, and other modern architectural surfaces.
Available bases: Micromarmo Ultra 300 (ready to use), Micromarmo Ultra B10 (ready to use, extra-fine), Micromarmo Ultra 1000 (ready to use, coarse), Micromarmo Floor (Portland, powder base).
METHOD OF APPLICATION Prepare the surface according to the substrate. Apply MicroMarmo Primer or Primer RV as required. Allow 24 hours to dry. When mesh is required, lay the fibreglass mesh unto surface. Apply the first coat of MicroMarmo Ultra using a flex trowel. Mesh is recommended over ceramic tile, plywood, cement board, horizontal surfaces, wet areas, floors, countertops, and high-traffic areas. Continue with additional coats of MicroMarmo Ultra until the desired finish is achieved: 2–3 coats when mesh is not required 3–4 coats when mesh is required Allow 24 hours drying time between coats. Sand and vacuum between coats before applying the next layer. Finish with the appropriate sealer:
TDS
SDS
METHOD OF APPLICATION Prepare the surface according to the substrate. Apply MicroMarmo Primer or Primer RV as required. Allow 24 hours to dry. When mesh is required, lay the fibreglass mesh unto surface. Apply the first coat of MicroMarmo Ultra using a flex trowel. Mesh is recommended over ceramic tile, plywood, cement board, horizontal surfaces, wet areas, floors, countertops, and high-traffic areas. Continue with additional coats of MicroMarmo Ultra until the desired finish is achieved: 2–3 coats when mesh is not required 3–4 coats when mesh is required Allow 24 hours drying time between coats. Sand and vacuum between coats before applying the next layer. Finish with the appropriate sealer:
- Intermedio K + Matt 2K (Gloss 2K) for waterproof, heavy-duty protection.
- Velatura for a breathable finish. Not suitable for floors.
TDSSDS[Sassy_Social_Share]
DECORATIVE MICROCEMENT FOR WALLS AND FLOORS
MicroMarmo Floor boasts a flawless, joint-free finish, distinguished from resin floors by its natural stone composition. It offers superior durability against compression, flexion, and wear. Waterproof and scratch-resistant, it's a perfect choice for floors, walls, and bathrooms.
Customizable in a myriad of colors and designs, MicroMarmo Floor adapts to any design setting. Its eco-friendly, mineral nature provides unparalleled comfort compared to synthetic alternatives. MicroMarm Floor delivers seamless floor-to-wall solutions, elevating spaces with striking visual impact and originality.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
TDS
SDS
TDS
SDS[Sassy_Social_Share]
TRANSPARENT TWO-COMPONENT ULTRAPROTECTIVE MATTE SEALER
MATT PROTECTOR 2K is the ultimate solution for preserving and enhancing decorative finishes on floors and walls with a matte finish. This two-component, multifunctional marvel offers unparalleled durability and resistance while delivering a sleek, matte appearance to surfaces.
As the final step in the MICROMARMO cycle, MATT PROTECTOR 2K ensures exceptional protection against wear and tear while providing a waterproof barrier. It also functions as a consolidating and dustproof finish for industrial concrete floors, both indoors and outdoors.
With its outstanding waterproofness, MATT PROTECTOR 2K serves as a non-shiny protective finish for decorative lime-based finishes inside shower areas and other moisture-prone environments, ensuring both protection and aesthetic enhancement.
Application: Brush and 10mm microfibre roller.
Mixing Instructions: Mix 5:1 ratio, A to B. Stir component A well before adding component B. Then mix A+B well for at least 3 minutes. Strain sealer before applying. Only mix the amount needed, as pot life is about 1 hour once mixed. ALWAYS mix by hand.
Coverage: 100 sqft / L, one coat. Apply 2 layers and allow 24 hours of drying time between each coat.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
TDS
SDS-A
SDS-B
[Sassy_Social_Share]
TDS
SDS-A
SDS-B
TWO-COMPONENT ULTRAPROTECTIVE GLOSSY TRANSPARENT COATING
GLOSS PROTECTOR 2K is the ultimate solution for preserving and enhancing decorative finishes on floors and walls. This two-component, multifunctional marvel offers unparalleled durability, resilience, and clarity, ensuring your surfaces remain pristine for years to come. Designed as the finishing touch in the MICROMARMO cycle, GLOSS PROTECTOR 2K provides a transparent shield against wear and tear while maintaining the original beauty of your decorative surfaces.
GLOSS PROTECTOR 2K also serves as a consolidating, dustproof finish with exceptional waterproofing capabilities, ideal for shower areas and mural surfaces.
Application: Brush and 10mm microfibre roller.
Mixing Instructions: Mix 5:1 ratio (A to B). Stir component A well before adding component B. Then mix A+B thoroughly for at least 3 minutes. Strain sealer before applying. Only mix the amount needed, as pot life is about 1 hour once mixed. ALWAYS mix by hand.
Coverage: 100 sqft / L (one coat). Apply 2 layers and allow 24 hours of drying time between each coat.
For detailed application instructions and specifications, please refer to the technical and safety data sheets.
[Sassy_Social_Share]
TDS
SDS-A
SDS-B